Epson LABELWORKS PX User Manual page 16

Cleaning
CAUTION
Turn off the printer and remove the batteries before cleaning.
If the AC adapter is connected, disconnect the AC adapter cable
from the printer.
Exterior
Wipe the dirt off with a soft cloth.
If it is very dirty, use a damp cloth.
CAUTION
Never use chemicals or solvents such as benzine, thinner, or
alcohol, or use a chemical duster.
Printhead
Clean the printhead with a cotton swab.
PeelGuard
WARNING
To prevent the risk of cuts, never insert fingers in the PeelGuard.
1. Pull out the tray.
2. Remove the tape scraps, then insert the tray back in
the printer.
Top
Safety Instructions
Specifications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Tray
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
16