Epson LABELWORKS PX User Manual page 36

Transferring Original Symbol Data
You can transfer your original symbol data to the printer
and use it without connecting to a computer.
Operation flow
Connect the printer to the
computer with a USB cable
1. Start Label Editor Professional.
On the computer
2. From the [File] menu, select [Data Transfer Tool].
Start Data Transfer Tool
On the computer
1. Click [Transfer Images].
Load a symbol image to
2. Select the printer.
the tool
3. Click [Load] and select your symbol image to be loaded.
1. Select the loaded image to be transferred.
On the computer
Transfer the symbol
2. Click [Transfer].
image to the printer
On the printer
The transferred symbol image is stored in the "Downloaded" category.
Use the symbol image on
You can use it just like you can with the built-in symbols.
the printer
MEMO
For how to install and operate Label Editor Professional, see
"Label Editor Professional User's Guide".
Data Transfer Tool starts.
The symbol data is transferred to the printer.
This printer does not
support these functions.
"Creating Labels with Symbol"
Top
Safety Instructions
Specifications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
36