Controls And Indicators - Cobra CPI 150 Operating Instructions Manual

4
CONTROLS & INDICATORS
Powering Up
To apply power to the CPI 150,
simply plug in to 12 Volt DC
source (cigarette lighter or
airplane power source).
Cigarette Lighter Plug
Airplane Plug
5
Power/Fault Indicator
The "fault" indicator of your
CPI 150 will light whenever
the unit detects excessively
high or low input voltage, or
begins to overheat.
CAUTION NOTE: Make sure
you unplug inverter from
power source before you
leave your vehicle.
power/fault
indicator