Drdw - Datarate Down - IDEETRON LoRaWAN Manual

#ADDR[Address]
[Address] = The address of the node in 8 ASCII characters.
The reply of the gateway will be:
*ADDR [Address]
[Address] = The address that is set.
To request the current transmit address that is set use this command:
?ADDR
The reply will be:
=ADDR [Address]
[Address] = The address that is set.
8.2 DRDW – Datarate down
This command is used for the datarate that is used on the down channel of the LoRaWAN
communication, see Figure 1.
To set the datarate use:
#DRDW[Datarate]
The [Datarate] can have the following values
The reply will be:
*DRDW [Datarate Description]
To request the current datarate use:
?DRDW
The reply will be:
=DRDW [Datarate Description]
Value Description
00 SF 12 BW 125 kHz
01 SF 11 BW 125 kHz
02 SF10 BW 125 kHz
03 SF9 BW 125 kHz
04 SF8 BW 125 kHz
05 SF7 BW 125 kHz
06 SF7 BW 250 kHz
Table 6: Datarate values
Pagina 7 of 12
LoRaWAN mini gateway
1-11-2016