Table of Contents
Advertisement
3 Introduction
The LoRaWAN mini gateway can be used to develop and test LoRaWAN motes. Also it can be used
to test gateway communication.
This manual will first give a global description of the LoRaWAN communication. In the "Commands"
chapter there will be a more specific explanation of the different settings.
4 Specifications
Modulation
Channel Up
Datarate Up
Channel Down
Datarate Down
Device Address
Network key
Application key
Tx Direction
Tx Timing
Tx Confirmation
Send ACK
See chapter 8 if you want to change these settings.
5 Installation
Connect the mini gateway to an USB port. The driver will be installed automatically. Otherwise the
driver can be downloaded from the FTDI website:
htp://www.ftdichip.com.
Download the VCP drivers.
The gateway can be controlled with a terminal program like Realterm,
http://realterm.sourceforge.net/
All the communication with the gateway is in ASCII format.
Radio connection
Table 1: Default radio settings
Serial communication USB
Datarate
Number of data bits
Parity
Number of stop bits
Table 2: Serial communication specifications
Pagina 4 of 12
LoRaWAN mini gateway
LoRa
868.100 MHz
SF12 BW 125 kHz
869.525 MHz
SF9 BW 125 kHz
00 00 00 00
2B7E151628AED2A6ABF7158809CF4F3C
2B7E151628AED2A6ABF7158809CF4F3C
Up
No
No
No
38,4 kbps
8
None
1
1-11-2016
Advertisement
Table of Contents
