Txcf - Transmit Confirmation; Txdi - Transmit Direction - IDEETRON LoRaWAN Manual

LoRaWAN mini gateway
Type A motes have a receive slot, 2 seconds after they send a message. To make sure a down
message from the mini gateway is sent in the time window transmit timing needs to be switched on.
To switch the transmit timing use:
#TXTM[Value]
Where [Value] is:
00 = Off
01 = On
The reply will be:
*Tx Timing Yes/No
To request the Tx timing use:
?TXTM
The response will be:
=Tx timing Yes/No
8.10 TXCF – Transmit Confirmation
The transmit confirmation sets the LoRaWAN message type that is send. If you sent a confirmed
message you request an ACK from either the mote or the gateway, the message is sent to. For
more information see chapter 7.
To set the confirmation use:
#TXCF[Value]
Where [Value] is:
00 = Unconfirmed
01 = Confirmed
The response is:
*Tx Confirm Yes/No
To request the current message type sent:
?TXCF
The response is:
=Tx Confirm Yes/No
8.11 TXDI – Transmit direction
The transmit direction determines if the message you want to send is in the Up or Down direction.
See Figure 1.
Pagina 11 of 12 1-11-2016