Data - Send Data - IDEETRON LoRaWAN Manual

LoRaWAN mini gateway
To set the direction use:
#TXDI[Value]
Where [Value] is:
00 = Up
01 = Down
The response is:
*Tx Direction Up/Down
To request the current direction use:
?TXDI
The response is:
=Tx Direction Up/Down
8.12 DATA – Send data
This command is used to send data to the node or gateway with all the settings done with de
different commands. This command can be used to send a maximum 51 bytes of data.
The mini gateway will directly send a message except if the transmit direction is down and transmit
timing is on.
To use this command send:
#DATA[Data]
[Data] = The data you want to send to the node. This field has a maximum of 102 characters
representing 51 bytes.
The reply from the gateway will be:
*DATA[Data]
[Data] = The data that will be send.
Pagina 12 of 12 1-11-2016