Establishing Bluetooth Connection - Reiner jetStamp graphic 970 Operating Manua

48 PCset graphic Help 970
Warnings for which an imprint is no longer possible
Warnings
Please insert print cartridge
Please remove and re-insert
print cartridge
Please recharge battery
Device error xxx
Warnings displayed in a message box
Warnings
Transfer error
Error in barcode generation
5.4

Establishing Bluetooth Connection

To establish a Bluetooth connection, activate Bluetooth (see
Open PCset graphic.
In the menu bar
device".
An automatic search is started.
All devices found, as well as all devices that have already been connected to the PCset graphic,
are displayed with model and serial number.
If the jetStamp graphic970 is not found, a new search run can be started with the "Search again"
button.
Cause
- No or defective print cartridge
- Incorrect print cartridge
- Print cartridge not inserted
correctly
- Ink level write error
- Rechargeable battery empty
- No battery/defective battery
Device error
Cause
Device defective or missing
connection
Too few characters entered
select the "File" tab and click "Search for REINER Bluetooth
Correction
Inserting the print cartridge
Insert print cartridge correctly
Charge battery
Inserting/replacing the battery
Disconnect the device from the
power supply for approx. 3 sec
(also batteries and USB
connection).
If the error remains after activation,
have the device inspected by the
REINER support.
Correction
Check device/connections and
try again
7 characters required
12 characters required
"Activate Bluetooth").
ERNST REINER GmbH & Co. KG