Honda XRM125 CFT125 2020 Owner's Manual page 59

Place your vehicle on its centre stand on a
3.
firm, level surface.
Place a drain pan under the drain bolt.
4.
Remove the oil fill cap/dipstick, drain bolt
5.
and sealing washer to drain the oil.
Discard the oil at an approved
u
recycling centre.
Sealing washer
6.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft)
7.
Required oil
8.
9.
Drain bolt
Engine Oil
u
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Fill the crankcase with the recommended
oil ( P. 41, P. 101) and install the oil fill
2 2
cap/dipstick.
When changing oil:
0.7 L (0.7 US qt, 0.6 Imp qt)
Check the oil level. P. 53
2
Check that there are no oil leaks.
Changing Engine Oil
55