#
Rear Wheel
When using a maintenance stand, be careful
not to damage the wheel speed sensor wire
and brake hose.
Removal
Support your motorcycle securely and
1.
raise the rear wheel off the ground using
a maintenance stand or a hoist.
Loosen the rear axle nut, lock nuts and
2.
turn the adjusting bolts so the rear wheel
can be moved all the way forward for
maximum drive chain slack.
Remove the drive chain from the driven
3.
sprocket by pushing the rear wheel
forward.
Remove the rear axle nut and washer.
4.
Tyre Puncture
Adjusting plate
Pulser ring
Lock nut
Adjusting bolt
Rear axle nut/Washer
Rear axle shaft
Drive chain
Removing Wheels
u
Wheel speed
sensor
Adjusting plate
Lock nut
Adjusting bolt
Continued
93