Honda SH300A 2015 Owner's Manual page 83

Rubber
seal
7. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8. Install the new oil filter and tighten.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
Engine Oil
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 25 N·m (2.5 kgf·m, 18 lbf·ft)
10. Fill the crankcase with the recommended
oil (
2
dipstick.
Required oil
When changing oil &
engine oil filter:
Oil filter
1.4 litres (1.5 US qt, 1.2 Imp qt)
When changing oil only:
1.2 litres (1.3 US qt, 1.1 Imp qt)
11. Check the oil level.
12. Check that there are no oil leaks.
u Changing Engine Oil & Filter
P. 62, 128) and install the oil fill cap/
P. 76
2
79