Honda SH300A 2015 Owner's Manual page 82

Engine Oil u Changing Engine Oil & Filter
Changing Engine Oil & Filter
Changing the oil and filter requires special
tools. We recommend that you have your
scooter serviced by your dealer.
Use a new Honda Genuine oil filter or
equivalent specified for your model.
NOTICE
Using the wrong oil filter can result in serious damage to
the engine.
1. If the engine is cold, idle the engine for 3
to 5 minutes.
2. Turn the ignition switch
for 2 to 3 minutes.
3. Place your scooter on its centre stand on a
firm, level surface.
4. Place a drain pan under the drain bolt.
78
5. Remove the oil fill cap/dipstick, drain bolt,
6. Remove the oil filter with a filter wrench
(Off) and wait
Drain bolt
and sealing washer to drain the oil.
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling centre.
Sealing
washer