Table of Contents
Advertisement
The NEG POWER MINI - NEG Pump Controller power supply serves for operating the
NEG (Non Evaporable Getters) pumps. It is designed to be used indoor in laboratory
conditions.
After transportation, the device has to be left idle without mains
voltage for at least 3 hours at the ambient temperature.
The use of the instrument for any other purpose than the one originally
intended may damage the instrument, injure the user and void all
warranties.
High voltage is present inside the instrument and also in the
connectors and cables, which may harmful to the user.
Manipulation of the cables and of the grounding wire is
prohibited while the appliance is in operation.
Likewise, the operation of the instrument without its protective
covers is prohibited.
Protect the device against humidity and against penetration of
conductive objects and liquids into the ventilation slots.
M.HIST.0138.23 R1
WARNING
WARNING
Security provisions
ATTENTION
Symbols on the Manual
These symbols appear on the product:
CAUTION
Pay specific attention
to the section
Page 2 of 28
th
2020
October, 06
Hide quick links:
Advertisement
Table of Contents
