Honda CMX500A 2019 Owner's Manual page 106

Tyre Puncture
u
Installation
Attach the side collars to the wheel.
1.
On the left side, place the wheel between
2.
the fork legs and insert the front axle shaft,
through the left fork leg and wheel hub.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
102
Removing Wheels
Align the end of the front axle shaft with
3.
the surface of the fork leg.
Tighten the left axle pinch bolts to hold
4.
the front axle shaft.
Install and tighten the front axle bolt.
5.
Torque: 51 N·m (5.2 kgf·m, 38 lbf·ft)
Loosen the left axle pinch bolt.
6.
Tighten the right axle pinch bolts.
7.
Torque: 22 N·m (2.2 kgf·m, 16 lbf·ft)
Surface of
fork leg
End of front
axle shaft