Application & Operation Live Tour; Power On; Assign Your Group Channel; Change Your Channel - Okayo OMG-100T Plus User Manual

OMG-100T l OMG-100R
Application & Operation
Live tour
The group guide talks to group members.
OMG-100T (group guide)
OMG-100R (group member)

Power On

1. Press the button for 1 second to turn the player on.
+
2. If shows up, press both
Turn On
player on.
Players are with inbuilt battery and make sure their batteries are fully charged before being
operated.

Assign Your Group Channel

1. Turn OMG-100T and OMG-100R on.
2. Type in # and then press the
3. Last selected channel number flashes slowly on OMG-100T whereas it flashes quickly on
OMG-100R.
4. Press the
adjustment is available on OMG-100R at this step.
5. Press the
6. OMG-100T is now sending signal of new-channel assignment to OMG-100R.
7. When OMG-100R receives new-channel assignment, new channel number shows up and
stops flashing. OMG-100R leaves the setting afterwards.
8. If OMG-100R fails to receive new-channel assignment, last selected channel number keeps
flashing quickly on the screen until the
9. To release OMG-100T from the setting, press the
There is no turn-on sequence between OMG-100T and OMG-100R for channel assignment.
Change Your Channel (if necessary)
1. OMG-100T and OMG-100R are automatically channel locked when they are turned on.
2. Press both
channel starts to flash on the screen.
3. Press the
4. Press the
5. Selected channel stops flashing. OMG-100T and OMG-100R leave the setting automatically.
Mode
Live
Listen
and
button on both OMG-100T and OMG-100R.
or button to select a new channel on OMG-100T, if necessary. No channel
button to confirm new channel, which starts to flash quickly on OMG-100T.
and buttons simultaneously till
or button to change your channel.
button or leave it for 5 seconds to confirm newly selected channel.
buttons simultaneously for 1 second to turn the
button is pressed to leave the setting.
button at any time.
symbol disappears. Last selected
2