Change Your Channel; Talk To Your Group Members; Adjust Your Talk Setting And Mic. Level; Assign Your Track Command To Group Members - Okayo OMG-100T Plus User Manual

OMG-100T l OMG-100R
8. If OMG-100R fails to receive new-channel assignment, last selected channel number keeps
flashing quickly on the screen until the
9. To release OMG-100T from the setting, press the
There is no turn-on sequence between OMG-100T and OMG-100R for channel assignment.
Change Your Channel (if necessary)
1. OMG-100T and OMG-100R are automatically channel locked when they are turned on.
2. Press both
channel starts to flash on the screen.
3. Press the
4. Press the
5. Selected channel stops flashing. OMG-100T and OMG-100R leave the setting automatically.
Talk to Your Group Members (OMG-100T)
1. The group guide can talk to group members via a press of Talk button
2. Three Talk preferences are available:
a) PTB: push to bolt
b) PTM: push to mute
c) PTT(default): push to talk
Adjust Your Talk Setting and Mic. Level (if necessary) (OMG-100T)
1. Press both # and
OMG-100T is off.
2. Default mode Leader shows up. Press the
3. Default talk PTT shows up. Press the
4. Press the
5. Default mic. level Mid shows up. Press the
6. Press the
will be off again.
*If OMG-100T was turned off by pressing both
buttons should be pressed at the same time at this step.
Assign Your Track Command to Group Members (OMG-100T)
1. Type in preferred track number on OMG-100T.
2. Press the
3. OMG-100R starts to play the track assigned by OMG-100T.
4. This track will be paused if Talk function is enabled on OMG-100T.
The track being played on OMG-100R can't be stopped if the
OMG-100T.

Select Your Language (1~32)

1. Every time when the player is turned on, language screen shows up.
2. Press the
3. Press the
Change Your Language (1~32)(if necessary)
1. If you intend to change the language when the player is on, type in #1, and then press the
button.
2. Press the
3. Press the
and buttons simultaneously till
or button to change your channel.
button or leave it for 5 seconds to confirm newly selected channel.
buttons* simultaneously for 1 second to turn the player on when
button to confirm (underline) the selection and then enter next setting.
button to confirm (underline) the selection and leave the setting. OMG-100T
button on OMG-100T to assign track command to OMG-100R.
or button to select your language.
button to confirm selected language and leave the setting.
or button to select your language.
button again to confirm selected language and leave the setting.
button is pressed to leave the setting.
button at any time.
symbol disappears. Last selected
button to continue.
or button to change your Talk preference.
or button to change your Mic. Level.
and buttons simultaneously earlier, #,
10
.
5
and
button is pressed on