EN
Display symbols:
Programme status indication Programme cycle indication
Remaining opera-
tion time
Remaining delay
time
Automatic weighing
3.3 Program selector
By turning the knob (Fig. 3-3) one of 16 programmes
can be selected, its default settings will be displayed.
Press this button (Fig. 3-4) gently to switch on, the dis-
play is shining. Press it again for about 2 seconds to
vated after a while machine will shut down automatically.
3.5 "Start/Pause" button
Touch this button (Fig. 3-5) gently to start or interrupt
the currently displayed programme.
Display for washing time, end time
delay as well as error codes and
service information.
Wash cycle
Rinse cycle
3-Control panel
Steam
Spin/drainage cycle
3-3
3-4
-
3-5
Start/Pause
HW120-B1
9