Haier HW80 User Manual page 10

3-Control panel
3-6
Note: Factory settings
there is no special requirement default settings are recommended.
3-6-1
Extra
Rinse
3-6-2
Delay
Note: Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.
10
3.6 Function buttons
The function buttons (Fig. 3-6) enables additional op-
tions in the selected programme before program start.
The related indicators are displayed.
gram, all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
To delete the setting or to cancel the setting process,
press the function button until the desired LED lights
Not all functions are available for all programmes (see
PROGRAMMES).
3.6.1 Function button "Extra Rinse"
Press this button (Fig. 3-6-1) to rinse the laundry more
intense with fresh water. This is recommended for
people with sensitive skin.
By pressing the button several times one to three ad-
ditional cycles (display P1-P3) can be selected.
Different programme has different extra maximum
rinsing times.
3.6.2 Function "Delay"
Press this button (Fig. 3-6-2) to start the program with
a delay. End time delay could be increased in steps of
means end of programme cycle will be in 6 hours and
30 minutes. Touch "Start/Pause" button to activate the
time delay.
The time delay must be longer than the programme run
time. Otherwise the programme will start immediately.
For deactivating the time delay; rotate programme se-
lector.
EN
-
If