Table of Contents
Advertisement
Fire Sentry FS7-130-SX and FS-130-SX2 Controllers
Installation Guide and Operating Manual
MAN0933_V1_1521-001_Rev E_08-12
SECTION 6: ORDERING INFORMATION
FS7-2173 Fire Detector, FS7-130-SX Controller, Test Lamps, Junction Boxes, and
Cabling
FS7-2173 Fire Detector:
Infrared Spectral Sensor Array.
FS7-130-SX Controller:
power input. Has (4) ALERT-1
TM
ALERT-1
Master Relay output for all Zones. Controls up to (12) FS7-2173
Detectors).
FS7-130-SX2 Controller:
power input. Has (4) ALERT-1
TM
ALERT-1
Master Relay output for all Zones. Controls up to (12) FS7-2173
Detectors) with Voting.
FSC JB-4 Junction Box:
with integral plug-in, self-locking connectors. Each Junction Box contains (4)
female connectors which can input (2) external Detectors, or other FS7
cables. The last Junction Box on the "daisy-chain" can input (3) Detectors
FS7 Cables:
Used for interconnecting the Detectors and Junction Boxes
to the SX Controller, use Male/Male to interconnect Junction Boxes and
Male/Open Pigtail to interconnect last Junction Box to Controller's plug-in
screw down terminal strip. Each FS7 Teflon cable uses circular, self-
locking, plug-in connectors with small 3/8 inch diameter, constructed of
chrome-plated brass with gold-plated contacts.
5 Foot Cable with Male/Male connector at each cable end
10 Foot Cable with Male/Male connector at each cable end
15 Foot Cable with Male/Male connector at each cable end
20 Foot Cable with Male/Male connector at each cable end
5 Foot Cable with Male connector and Open Pigtail
10 Foot Cable with Male connector and Open Pigtail
15 Foot Cable with Male connector and Open Pigtail
20 Foot Cable with Male connector and Open Pigtail
50 Foot Cable with Male connector and Open Pigtail
20 Foot Male at one end of cable/ Female connector at other cable end
FS7-2173 Detector Long Range Test Lamp:
operated Test Lamp to verify operation end-to-end without test fires.
The battery is rechargeable and an AC/DC wall transformer is included
for recharging. Use to test FS7-2173 Detectors at up to (10) feet
distance.
FS7-2173 Detector Short Range Test Lamp:
battery operated Test Lamp to verify the FS7-2173 Detector operation
end-to-end without test fires. An AC/DC wall transformer is included for
recharging the battery. Use to test FS7-2173 Detectors at up to (2) feet
distance.
DESCRIPTION
Electro-Optical Fire Detector with Wide Band
Installs into Fire Control Cabinet. 24 VDC
TM
TM
/ALARM-2
Relay output Zones and (1)
Installs into Fire Control Cabinet. 24 VDC
TM
TM
/ALARM-2
Relay output Zones and (1)
For connecting Detectors to the Controller
Handheld, battery
Small, handheld,
PART NUMBER
FS7-2173
FS7-130-SX
FS7-130-SX-2
FS7-2179
CBMM-5
CBMM-10
CBMM-15
CBMM-20
CBMO-5
CBMO-10
CBMO-15
CBMO-20
CBMO-50
CBMF-20
FS-746
FT-S7
Page 14
Advertisement
Table of Contents
