Table of Contents
Advertisement
Smart Buildings
Maintenance and service
6
Maintenance and service
When designing this device, Smart Buildings largely avoided using high-wear parts. The parts subject to
wear and tear are dimensioned to last longer than the lifetime of the product when it is operated normally.
Operate this device according to the specifications.
Depending on the degree of pollution in the operating environment, check at regular intervals that the
ventilation slots in the device are not obstructed.
CAUTION ‒
RISK OF TRANSIENTS OR ELECTROSTATIC DISCHARGES
Do not open the housing.
Failure to follow these instructions can result in injury or equipment damage.
Note about navigation in the PDF: Key combination 'Alt +
left arrow' jumps to the previous view/page
IS/S 8.1.1, ISP/S 8.1.1 | 9AKK107992A0761 EN Rev. B 39
Advertisement
Table of Contents
