Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for ABB NE802
Summary of Contents for ABB NE802
- Page 1 800xA Networks NE802 User Manual...
- Page 3 800xA Networks NE802 User Manual...
- Page 4 ABB products. The presence of any such description of a standard or reference to a standard is not a representation that all of the ABB products referenced in this document support all of the features of the described or referenced standard. In order to determine he specific features supported by a particular ABB product, the reader should consult the product specifications for the particular ABB product.
-
Page 5: Table Of Contents
Table of Contents Table of Contents Safety ........................7 Warning ................................7 Section 1 Industrial Ethernet 5-port Switch ............9 Description ................................9 Section 2 Interface Specifications ..............10 Connections ...............................11 Power ................................12 TX ..................................12 F1G, 1 SFP slot ..............................13 DIP switch settings ............................14 LED indicators ..............................18 Section 3 Installation................... - Page 6 Table of Contents 3BSE083678...
-
Page 7: Safety
Safety Safety Warning Equipment intended for installation in “Restricted Access Location” or equivalent. Do not look directly into fibre optical fibre port or any connected fibre although this unit is designed to comply with Class 1 laser products, 21 CFR 1040.10 and 1040.11. - Page 8 Safety 3BSE083678...
-
Page 9: Section 1 Industrial Ethernet 5-Port Switch
–40 to +74 °C (–40 to +165 °F) can be achieved with no moving parts. The unit has been tested both by ABB and external test houses to meet EMC, isolation, vibration and shock standards, all to the highest levels suitable for heavy industrial, trackside and maritime environments. -
Page 10: Section 2 Interface Specifications
Section 2 Interface Specifications Section 2 Interface Specifications Power Operating voltage Rated: 12 to 48 VDC Operating: 9.6 to 57.6 VDC Rated current 12 – 48 VDC; 260 – 65 mA Rated frequency Inrush current, I 22.7·10- s @ 48 VDC Startup current* 2 x Rated current Polarity... -
Page 11: Connections
Section 2 Interface Specifications Ethernet SFP pluggable connections (FX or TX) Electrical specification IEEE std 802.3. 2005 Edition Data rate 100 or 1000 Mbit/s transceivers supported Duplex Full or Auto, depending on transceiver Transmission range Depending on tranceiver Connection SFP slot holding fibre transceiver or copper transceiver Number of ports Connections LED indicators... -
Page 12: Power
Section 2 Interface Specifications Power NE802 supports redundant power connection. The positive inputs are +DC1 and +DC2, the negative inputs for both supplies are COM. The power is drawn from the input with the highest voltage 4-pos screw terminal Description... -
Page 13: F1G, 1 Sfp Slot
Each slot can hold one SFP transceiver for copper or fibre cable. For supported transceivers, see SFP transceivers user guide (art no. 3BSE080641) available in ABB Solutions Bank. Optical/Electrical specification IEEE std 802.3. 2005 Edition Data rate 100 or 1000 Mbit/s... -
Page 14: Dip Switch Settings
Section 2 Interface Specifications DIP switch settings DIP-switches are accessible under the lid on top of the unit. DIP-switches are used to configure the unit. Prevent damage to internal electronics from electrostatic discharges (ESD) by discharging your body to a grounding point (e.g. use of wrist strap), before the lid on top/front of the unit is removed. - Page 15 Section 2 Interface Specifications To be observed when the DIP-switches are configured; • Speed and duplex setting only valid when auto-negotiation is disabled. • When monitoring selected all outgoing packets from the switch is also copied to the port 1. •...
- Page 16 Section 2 Interface Specifications Port 1 settings Port 3 settings Auto-negotiation enabled Auto-negotiation enabled 10/100/1000 Mbit/s speed 10/100/1000 Mbit/s speed selected selected 1 2 3 4 5 6 7 8 9 1 0 1 2 3 4 5 6 7 8 9 1 0 100 Mbit/s speed selected 100 Mbit/s speed selected 1 2 3 4 5 6 7 8 9 1 0...
- Page 17 Section 2 Interface Specifications Port mirroring settings Port 5 settings No monitoring 1000 Mbit/s speed selected selected 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 1 0 Monitoring selected 100 Mbit/s speed selected 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10...
-
Page 18: Led Indicators
Section 2 Interface Specifications LED indicators Indicators (LED) Power (PWR) Link (LINK) of every port Speed (SPD) and duplex (DPX) of TX ports Status Description Internal power, initialising OK Slow flash Initialisation progressing Fast flash Initialisation error LINK/SPD No Ethernet link Good Ethernet link Flash Ethernet data is transmitted or received, traffic indication... -
Page 19: Section 3 Installation
Section 3 Installation Section 3 Installation Mounting This unit should be mounted on 35 mm DIN-rail, which is horizontally mounted on a wall or cabinet backplate. Snap on mounting, see figure. Removal Press down the black support at the back of the unit, see figure. 10 mm * (0.4 inches) 25 mm... -
Page 20: Fibre Optic Handling
Section 3 Installation Fibre Optic Handling Fibre optic equipment needs special treatment. It is very sensitive to dust and dirt. If the fibre will be disconnected from the modem the protective hood on the transmitter/receiver must be connected. The protective hood must be kept on during transportation. -
Page 21: Type Tests And Environmental Conditions
Section 3 Installation Type tests and environmental conditions Environmental Basic standard Description Test levels phenomena EN 61000-4-2 Enclosure Contact: ±6 kV Air: ±8 kV Fast transients EN 61000-4-4 Power port ±2 kV Signal ports ±2 kV Surge EN 61000-4-5 Power port Line to earth: ±2 kV Line to line: ±1 kV Signal ports... - Page 22 Section 3 Installation Environmental Temperatures EN 60068-2-1 Operating –40 to +74 °C (–40 to +165 °F) EN 60068-2-2 Storage and –50 to +85 °C (–58 to +185 °F) transport Relative humidity EN 60068-2-30 Operating 5 to 95 % (non-condensing) Storage and 5 to 95 % (condensation allowed transport outside packaging)
- Page 24 Contact us www.abb.com/800xA Copyright© 2016 ABB. www.abb.com/controlsystems All rights reserved.