Table of Contents
Advertisement
Smart Buildings
Product Overview
3.4
IS/S 8.1.1 IP Switch
Fig. 1: Device illustration IS/S 8.1.1 example of an IP Switch
The device is designed for the special requirements of building automation. The device is designed for
installation in electrical distribution boards and small casings for rapid mounting on a 1.38 in (35 mm)
mounting rail in accordance with EN 60715. The device meets the relevant industry standards, provides
very high operational reliability, even under extreme conditions, and also longterm reliability and flexibility.
12 9AKK107992A0761 EN Rev. B | IS/S 8.1.1, ISP/S 8.1.1
Note about navigation in the PDF: Key combination 'Alt +
left arrow' jumps to the previous view/page
Advertisement
Table of Contents
