Basic Safety Recommendations; Instructions For Safe Operation - Risks - Paramina Typhoon Open 15E User Manual

Hide thumbs Also See for Typhoon Open 15E:
Table of Contents

Advertisement

Typhoon Open –
User Manual -

Basic safety recommendations

 The compressor is manufactured following current EU safety regulations.
 The compressor is intended ONLY for compressing atmospheric air with a content of oxygen (21±1)%.
Use of any other gas type is not allowed. The manufacturer is not liable for damages caused by
using the unit any other way than the intended.
 Use the compressor after making sure it is in perfect working condition. Any malfunction or failure must
be repaired immediately. Strictly follow the operation and maintenance instructions described in this
manual.
 Read carefully the instructions in this manual and follow them. Make sure users of the compressor are
familiar with the user instructions of the unit and its proper operation. Make sure they are authorized,
trained and trustworthy individuals. Make sure you are aware of and implement the current legal and all
other regulations pertaining to avoiding accidents and protecting the environment.
 During first start or after maintenance, check motor's direction of rotation. There is an arrow indicating
proper rotation. If the direction is reversed, interchange two of the three phase leads in the switch
Never change leads at the motor terminal board.
 Before starting any work pertaining to maintenance of the compressor, turn off the supply from the
mains and press the Emergency Stop.
 If regulations dictate it, use means of individual protection.
 Pay attention to labels indicating safety and risk for the unit. Strictly follow them and do not destroy
them.
 For any change in the operation of the unit, contact immediately the manufacturer.
 Any alteration – conversion of the unit without the manufacturer's prior written consent is not allowed.
 Spare parts MUST be genuine – approved by PARAMINA SA.
 Get accustomed to the position and use of fire extinguishing equipment that must be near the
compressors.

Instructions for safe operation - risks

 Check the unit on the inside and outside on a daily basis in order to make sure it is in good working
condition.
 Do not start the operation of the unit if you do not ensure your own safety.
 Before you operate the compressor, make sure that requirements are met for the safe and smooth
operation of the unit.
 Floor must be even. Adjust the anti vibration pads, so as the unit is in horizontal position and shocks
are minimized.
 Place the compressor in a well-ventilated area. Make sure that the intake air for the compressor is
clean and cool. Prevent the hot cooling air from recirculating to the cooling air intake. Make sure
that foreign objects cannot get into the compressor with the intake air. Make sure that the intake air
does not contain any smells, fuel or fumes, explosive or inflammable gases or harmful
substances.
 Units with petrol engine or diesel engine should not be used indoors.
 Assign the unit (if it uses petrol engine or diesel engine) towards the direction of the wind, so
as fumes are getting away. In this case, use the input hose of the inlet air filter in such a way,
that fumes are avoided to enter the compressor.
 Keep the compressor away from flammable material. Do not smoke when opening the fuel tank.
 If any malfunction of the unit occurs, stop immediately its operation and check – fix the problem.
 Before any maintenance or repair works, inform the users.
 When replacing heavy-weight components, strap them carefully on the proper lift truck. Never walk
under such components when they are lifted.
 Before any maintenance works, clean the area from out-of-use material, oils, fuel or other liquids from
the unit. Do not use corrosive materials. If you clean the unit by water or steam, make sure that neither
(water nor steam) comes close to the electric motor or the electric system and ensure that they will not
enter open hoses. For cleaning, use lint-free cloth.
 After cleaning or repairing the unit, check all hoses for leaks, loose connections, wear or damages.
Tight again all connections and recheck every maintained safety device.
 Ensure safe and environmental friendly disposal of consumable materials and old spare parts.
 Our company suggests that the compressor should operate with automatic stop, adjusted 10%
above the working pressure.
PARAMINA SA – Byway Evaggelistrias str. 19300 Aspropirgos, Greece, Tel: 0030 210 5575860-1
Fax: 0030 210 5575868, email:
12/2013 edition
service@paramina.gr
- website:
www.paramina-compressors.com
box.
.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents