Operating The Mower Blade-Control Switch (Pto) - Toro TimeCutter SS3225 Operator's Manual

distance (twice the width of the machine) between
the machine and any hazard. Use a walk behind
machine or a hand trimmer to mow the grass in
these areas.
Figure 11
1. Safe Zone-Use the mower here on slopes less than 15
degrees
2. Danger Zone-Use a walk-behind mower and/or hand
trimmer on slopes greater than 15 degrees
3. Water
4. W=width of the machine
5. Keep a safe distance (twice the width of the machine)
between the machine and any hazard.
•
Avoid starting, stopping or turning the machine on
slopes. Avoid making sudden changes in speed or
direction; turn slowly and gradually.
•
Do Not operate a machine under any conditions
where traction, steering or stability is in question.
Be aware that operating the machine on wet
grass, across slopes or downhill may cause the
machine to lose traction. Loss of traction to the
drive wheels may result in sliding and a loss of
braking and steering. The machine can slide even
if the drive wheels are stopped.
•
Remove or mark obstacles such as ditches, holes,
ruts, bumps, rocks or other hidden hazards. Tall
grass can hide obstacles. Uneven terrain could
overturn the machine.
•
Use extra care while operating with accessories or
attachments, such as grass collection systems.
These can change the stability of the machine
and cause a loss of control. Follow directions for
counter weights.
•
If possible, keep the deck lowered to the ground
while operating on slopes. Raising the deck while
operating on slopes can cause the machine to
become unstable.
Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the
mower blades and any powered attachments.
Engaging the Blade-Control
Switch (PTO)
g221745
Note:
Always engage the blades with the throttle in
the F position
AST
Disengaging the Blade-Control
Switch (PTO)
20
Figure 12
(Figure 13).
Figure 13
Figure 14
g008945
g186693
g009174