4.1
Driver Download/Installation
Drivers for the GENE-CML5 can be downloaded from the product page on the AAEON
website by following this link:
https://www.aaeon.com/en/p/subcompact-boards-gene-cml5
Download the driver(s) you need and follow the steps below to install them.
Step 1 – Install Chipset Drivers
1.
Open the Step 1 – Chipset folder
2.
Run the SetupChipset.exe in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 2 – Install Graphics Drivers
1.
Open the Step 2 – Graphic folder
2.
Run the igxpin.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 3 – Install Network Driver
1.
Open the Step 3 – Network folder
2.
Run the PROWinx64.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Chapter 4 – Driver Installation
77