Table of Contents
Advertisement
4.1
Driver Download and Installation
Drivers for the NANOCOM-EHL can be downloaded from the product page on the
AAEON website by following this link:
https://www.aaeon.com/en/
Download the driver(s) you need and follow the steps below to install them.
Step 1 – Install Chipset Drivers
1.
Open the Chipset Driver folder
2.
Run the SetupChipset.exe file
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 2 – Install Graphics Driver
1.
Open the Graphics Driver folder.
2.
Run the igxpin.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 3 – Install LAN Drivers*
Note: The download package has been split into a driver package and an Intel®
PROSet package. The driver package must be installed prior to installing the Intel®
PROSet package.
LAN Driver Installation:
1.
Open the LAN Drivers folder
2.
Run the Wired_driver_27.3_x64.exe file
3.
Follow the instructions
4.
Drivers will be installed automatically
Intel® PROSet Installation:
Chapter 4 – Driver Installation
53
Advertisement
Table of Contents
