Flex FX2221 Operator's Manual page 18

WARNING
careful when the tool is not in use or when
carrying it at your side.
SWITCHING ON AND OFF (FIG. 22)
Switching ON: push either left or right on/off
switch forward and release.
Switching OFF: push either of the switches
forward and release.
LED WORK LIGHT (FIG. 23)
Your tool is equipped with two LED work lights
located on the front of the tool. The lights
provide additional illumination of the workpiece
surface for operation in lower-light areas.
Press the LED switch to turn the lights on. The
light will stay on for about 10 seconds. When
you turn the tool ON, the lights will turn on
automatically and remain on for as long as the
tool is ON. The light will turn off after about 10
seconds of inactivity.
You can deactivate the automatic switching of
the lights by pressing the light switch to turn the
lights on and then immediately press the light
switch again to turn the lights off.
The LED light electronics feature a memory
function with saving the last setting.
OPERATING INSTRUCTIONS
Battery tools are always in
operating condition. Be
Fig. 22
Left Switch
Fig. 23
LED
Switch
LED work lights
-18-
Right Switch