Flex FX2221 Operator's Manual page 10

INSTALLING AND REMOVING THE SAW
The tool can only accept most commonly
available T-shank blades.
To install the saw blade (Fig. 4):
a. Insert the blade (with its teeth facing the
cutting direction) into the slot of the blade
holder as far as the blade can go.
b. Pull down on the blade to verify that the blade
is securely locked in place.
NOTICE: When inserting the saw blade, the
back of the blade must rest in the groove of the
guide roller.
To remove the saw blade (Fig. 5):
a. Turn the blade release lever as shown and
remove the saw blade.
b. Release the blade release lever.
WARNING
saw blade from the tool. The saw blade is
sharp and may be hot after prolonged use.
BLADE
Always wear protective
gloves when removing the
Fig. 4
Guide Roller
Fig. 5
-10-