Controls And Connectors - ARTHUR HOLM ERT 30 User Manual

CONTROLS AND CONNECTORS

12V.D.C.:
Power input connector. Plug the power supply supplied with
the unit.
Set-up:
Eight deep switches to control and setup the unit:
- DIP1: Activates the radio signal to control the unit using AHlink app.
- DIP2: Activates the automatic AHnet ID configuration on the RS422
bus.
- DIP3: Not used.
- DIP4: Activates firmware upgrades.
- DIP5: Not used.
- DIP6: Configures the factory IP address.
IP: 192.168.0.128
MASK: 255.255.255.0
GATEWAY: 192.168.0.3
MAC: 70:B3:D5:49:70:00
- DIP7: Not used.
- DIP8: Not used.
10