Download
Share
Print this page
ZKTeco RG4100+ Configuration Manual
  1. Manuals
  2. Brands
  3. ZKTeco Manuals
  4. Gateway
  5. RG4100+
  6. Configuration manual

ZKTeco RG4100+ Configuration Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Configuration Manual
RG4100+ Gateway
Date: February 2020
Doc Version:1.0
English
Thank you for choosing our product. Please read the instructions carefully before
operation. Follow these instructions to ensure that the product is functioning
properly. The images shown in this manual are for illustrative purposes only.
P a g e
| 5
For further details, please visit our Company's website
www.zkteco.com.
Copyright©2020 ZKTECO CO., LTD. All rights reserved.

Advertisement

loading

Related Manuals for ZKTeco RG4100+

Summary of Contents for ZKTeco RG4100+

  • Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 2 ZKTeco supplied equipment vests in and is the property of ZKTeco. The contents hereof should not be used or shared by the receiver with any third party without express written permission of ZKTeco.
  • Page 3 ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment malfunctions due to any non-compliance of the instructions contained in this manual (ii) in case of operation of the machine/unit/equipment beyond the rate limits (iii) in case of operation of the machine and equipment in conditions different from the prescribed conditions of the manual.

  • Page 4: Table Of Contents

    RG4100+ Gateway Configuration Manual Table of Contents INTRODUCTION............................5 INITIALIZING GATEWAY.......................... 5 LAN AND WAN CONNECTION.........................5 PC NETWORK CONFIGURATION......................6 GATEWAY LOGIN............................7 WAN SETTINGS............................8 SERVER CONFIGURATION........................9 INTERFACE SETTINGS..........................10 P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 5: Introduction

    1. Use a Network Cable to connect the PC to the LAN port of the Gateway, and in turn, the LAN LED blinks on the Gateway. 2. Connect the WAN port of the Gateway to the router, and in turn, the WAN LED blinks on the Gateway. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 6: Pc Network Configuration

    2. On the Network tab, select Internet Protocol Version 4 (TCP/IPv4) > Properties; then on the General tab, click Obtain an IP address automatically and click OK to configure your PC. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 7: Gateway Login

    192.168.82.1 to open the Gateway Login Page and enter the default login password admin. 2. After login, the Router Status Interface gets displayed as shown below. The System fetches the DHCP information automatically and obtains the WAN IP address (e.g. 192.168.132.104). P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 8: Wan Settings

    2. After entering the details, click OK to save, where the Gateway will restart automatically and updates the WAN IP configuration successfully. Note: DHCP and Wireless options are not recommended to be selected as WAN Type. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 9: Server Configuration

    3. Manually restart the Gateway to save the configuration, and now you can move the Network Cable away from the LAN port and connect your PC with the router again. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 10: Interface Settings

    3. On the Operations column, click Add to add the Gateway in the software, then on the Add interface, enter the Device Name, Building name, and Floor number details, and click OK to save. P a g e | 10 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 11 Gateway is active/online mode and will take 1 hour to accept the ZigBee connection from locks so that you can swipe the Net-in card on the locks. P a g e | 11 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 12 Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved. Copyright © 2020 ZKTECO CO., LTD. All Rights Reserved. Copyright©2019 ZKTECO CO., LTD. All rights reserved.