Advertisement
E. PAIRING OF THE HALO - ZONE 2
The Halo PRT controlling zone 2 will now
need to be paired with the Smart Interface
installed by the boiler. Ensure the Smart
Interface is still in pairing mode with the
Zigbee LED flashing red.
1. When the batteries are inserted, the Halo
PRT will power up automatically.
2. The device will prompt pairing with the
Smart Interface using an easy step-by-step
process.
3. Simply follow the on-screen guide to select
the type of boiler, Heat & System, and the
system type, Two zone heating and hot
water and Zone 2.
4. The Halo PRT screen will show "Pairing
in Progress", then "Synchronisation in
Progress" and then "Pairing Complete"
when the Halo PRT has successfully
connected to the Smart Interface.
The Date and Time are automatically
uploaded from Zone 1.
5. The home screen will be displayed showing
the current and target temperature and the
temperature bar.
The Zigbee communication icon will also be
visible on the display.
Zigbee icon
Advertisement
