Installation Check - Zte MC7010 Quick Start Manual

Connecting the POE Adapter
1. Connect the CAT5E network cable which is from the MC7010 to the network
port (RJ45-2) on the POE adapter.
2. Connect the PC network port (RJ45-1) on the POE adapter to your PC/IDU
(router) with the RJ-45 network cable.

Installation Check

Device Installation:
• The MC7010 is installed firmly.
• The network cables are installed firmly.
• The cover plate on the device is installed.
• The nano-SIM card is installed.
• The network interface on the POE adapter is installed correctly.
Cables Installation:
• Verify that all cables are connected properly, cable connectors are secure.
• Cables should be laid in a clear and straight manner without crossing each
other. There is no obvious curve or slant. Cables do not hang in the air or cross
each other.
14