Zte MC7010 Quick Start Manual page 19

Indicator
SIGNAL
On
①
NOTES:
• To avoid light pollution and save energy, indicators will be turned off after the
device operates normally for about 15 minutes. If indicators need to be solid
on, you can change it's settings on the 5G CPE configuration page.
• When a problem occurs, indicators will be automatically lighted up again to
help you check the device status. After the problem is resolved, indicators will
be turned off immediately.
Status
Three 5G/4G LTE
LEDs on
Two LEDs 5G/4G LTE
on
Only first 5G/4G LTE
LED on,
the other
two off
Off There is no signal or no nano-SIM card is inserted.
Description
The signal strength is Perfect/
Great (RSPR≥-95dB).
3G The signal strength is Perfect/
Great (RSPR≥-93dB).
The signal strength is Good
(-95dB>RSPR≥-115dB).
3G The signal strength is Good
(-93dB>RSPR≥-107dB).
The signal strength is Poor/Terrible
(RSPR<-115dB).
3G The signal strength is Poor/Terrible
(RSPR<-107dB).
16