Status Menu; Line/Aes Menu - digico DQ-Rack User Manual

DQ & MQ-Rack User Guide

Status Menu.......................................................

The Status menu is the first menu visible once the rack is unlocked. No adjustments are possible from this
menu.
On the MQ-Rack the status menu page displays the sample rate the rack is working at, whether it has a link via
the MADI MAIN, MADI AUX or both and the current temperature of the rack.
On the DQ-Rack the status menu shows the working sample rate, whether the rack is receiving control
information and the current internal temperature of the rack.

Line/AES Menu ...................................................

In the Line/AES menu page, the user can change the state of the 4 switchable Line/AES outputs, by selecting
the desired socket and changing it between Line and AES using the left and right buttons. When the socket is
in AES mode the LED light below the socket will light up blue.
Note: On Quantum consoles, this setting's status can be displayed and switched from within the Audio
I/O panel on the console.
MQ-Rack Status Menu
DQ- Rack Status Menu
1.5 Using the Q-Rack Menu System
12