Table of Contents
Advertisement
Nord Stage v3.1x
MIDI CC
This allows you send MIDI Control Change messages to control a parameter of your choice on the
external instrument. You first have to decide which Controller number the P
coder should send value changes for. This is done on the Extern Menu:
1. Press S
HIFT
2. Use the P
AGE
3. Use the V
ALUE
for the external instrument to see which parameters are assigned to which CC numbers.
4. Press the E
XIT
If you now activate the MIDI CC button in the Parameter Select section, you can control the selected
external parameter using the P
on the Extern menu - see
receive MIDI CC messages for this to function.
A
S
BOUT
END
You can set whether Program Change, Volume and MIDI CC messages are sent out when you load
a Program in Nord Stage. If you do not want this to occur, make sure "Send On Load" is set to "Off"
on the Extern menu.
and the E
button to access the Extern menu.
XTERN
buttons to select the "Extern MIDI CC Number" menu page.
D
to select a MIDI CC Number (0-119). You may want to consult the manual
IAL
(S
) button briefly to exit.
HIFT
ARAMETER
"Extern menu" on page
O
L
N
OAD
10. The Extern section: The Parameter section
rotary encoder in the Extern section. You can turn this off
70. The external instrument may have to be set to
rotary en-
ARAMETER
Page 65
Hide quick links:
Advertisement
Table of Contents
