Connections; Nord Stage Rear Panel; Audio Connections; Midi Connections - Clavia Nord Stage User Manual

3. Connections: Nord Stage rear panel
3. C
ONNECTIONS
N S
ORD TAGE REAR PANEL
A
UDIO CONNECTIONS
• Make all audio connections before turning on your power amplifier!
• All signal cables used with the Nord Stage must be shielded.
• The four audio outputs (CH O
• If you wish to connect the Nord Stage in stereo to your audio equipment, you should use CH1 O
in pair with C
• You can also route individual instruments to CH O
channels. This is done on the System page - see
MIDI

CONNECTIONS

• If you are using a Nord Stage together with a MIDI keyboard, connect a MIDI cable from MIDI
Out on the keyboard to MIDI I
• If you are using Nord Stage to control an external MIDI instrument, connect a MIDI cable from
MIDI O on the Nord Stage to the MIDI In connector on the other instrument.
UT
Page 10
1-4)) are line level and unbalanced.
UT
2 O .
H UT
on the Nord Stage.
N
3 & 4 either in stereo or as two mono
UTPUTS
page 66.
Nord Stage v3.1x
UT