Clavia Nord Stage User Manual page 46

6. The Instruments: The Synth section
The third Envelope mode, indicated by both LEDs, is similar to the first mode, except that the enve-
lope quickly goes to zero when the key is release.
F S
ILTER ECTION
The filter is, together with the oscillators, the most important sound-shaping tool in a synthesizer. The
filter section in Nord Stage comprises a lowpass filter with either a 12dB or 24 dB slope, with selecta-
ble keyboard tracking. The filter has adjustable resonance, and is self-olscillating at high resonance
settings. The filter cut-off frequency can be modulated by velocity or by the Mod Envelope.
F F
ILTER REQUENCY
With the F
REQ
the high-frequency content in the signal will increase. This parameter can be Morph controlled.
LP F
ILTER
In Nord Stage you can select between 12 dB/octave and 24 dB/octave (4-pole) slopes for the low pass
filter. Press S
HIFT
is selected.
24 B (4-P
D OLE
This is the classic "synth filter" slope used in the Minimoog and Prophet-5 among others. It cuts out
frequencies rather drastically, 24 dB per octave. A 24 dB filter is also known as a 4-pole filter.
Page 44
C
UTOFF
knob you set the cutoff frequency. Simply put, if you turn the F
and the 4 P button to switch type. The 4 P
OLE
)
Nord Stage v3.1x
knob clockwise,
REQ
When you "open" a low-
pass filter, the high-fre-
quency content increases
in the output signal.
LED shows which filter mode
OLE
The figure shows the filter
with 24 dB and 12 dB
slopes.