Clavia Nord Stage User Manual page 56

7. The Effects: The Panel effects
A
MP MODEL
You select a type of amplifier/speaker simulation using the S
tion. There are three types available, with different characteristiscs:
If all LEDs are off, the effect combines EQ with overdrive (no amp/speaker modelling).
G
LOBAL EFFECTS
If activated, the Compressor and Reverb effects will process all signals routed to
the CH 1/CH 2 outputs, but do not affect any signals routed to the CH 3/CH 4
outputs. Both these effects are stereo in/out.
C
OMPRESSOR
The Compressor will even out the dynamics of what you play, making low level
sounds louder and high level sounds lower. This produces a tight, punchy sound
and makes the overall level easier to control in a live mix situation. You activate
the Compressor using the O
compression applied.
R
EVERB
The Reverb section simulates the natural sound reflections in various acoustic en-
vironments. You can choose between five reverb types, indicated by the three
LEDs lit one or two at a time
Reverb name
Hall soft
Hall 2
Stage soft
Stage 2
Room
The D /W
RY ET
Page 54
Amp Model
Amp 3 A simulation of a Roland Jazz Chorus
speaker cabinet, powered by a tube amp.
Amp 2 A simulation of the Wurlitzer 200A internal
speaker, powered by a tube amp.
Amp 1 A simulation of a Fender Twin tube ampli-
fier and speaker cabinet.
button. The A
N
:
A reverb with the response and character
of a spacious hall, with long decay and a
mellow character.
A hall reverb with a slightly brighter char-
acter
A reverb with a medium decay time and
mellow character.
A medium decay reverb, with slightly
brighter character.
Room ambiance with a rather short decay
time.
knob sets the balance between the unprocessed and the processed signal.
ELECTOR
Description
knob controls the amount of
MOUNT
Description
Nord Stage v3.1x
button in the Amp Model sec-