Yamaha ESB-1090 Owner's Manual page 11

1. Attach the mounting template (supplied) on a wall and mark the
two locations for the screw holes.
Mounting template
Tape or thumbtacks
2. Remove the mounting template from the wall, and then install
screws (sold separately) at the points marked on the wall.
Diameter 7 to 9 mm
(1/4" to 3/8")
13 to 15 mm
(1/2" to 5/8")
Screw holes
457 mm (18")
4 to 5 mm
Within 20 mm
(3/4") or more
3. Attach the supplied spacers to the bottom of the unit.
Peel off the backing from the spacer and press the adhesive part
against the bottom of the unit.
4. Hang the unit on the screws you installed.
11
Spacers
Mounting holes on the
bottom of the unit
Touch panel