Table of Contents
Advertisement
Available languages
Available languages
Control Panel
SEAL ONLY Button: Start heat-seal operation. Use to make bags from rolls or seal bag in PULSE Mode.
DRY VAC & SEAL Button: Start vacuum and seal operation for dry foods.
WET VAC & SEAL Button: Start wet vacuum for liquids or moist foods.
ACCESSORY Button: Operate Accessory Port on Lid of appliance. Use with vacuum hose, special canisters, and zipper bags (not included).
PROGRESS Bar: Lights indicate progression of selected function.
DATE CODE: The Date Code function may be used with either DRY VAC & SEAL or WET VAC & SEAL. To set date on Date Coder, open Lid and rotate Date Wheels
until desired date lines up with indicator arrows.
PULSE/CANCEL Button (pause/cancel button): Allows to manually vacuum and seal delicate foods or non-foods or stops any function at any time.
Indicator Lights: Blue indicator lights will flash when lid is locked and unit is ready to seal. Once desired function is selected, blue light will stop flashing and become
solid. The green progress bar will slowly illuminate. When cycle is complete, a beep will sound and progress bar lights will be illuminated. This indicates that you may
unlock lid and remove sealed bag.
4
Advertisement
Table of Contents
