Honeywell Pro-Watch 7000 Security Manual page 17

Data at Rest Encryption
The PW7K panel comes with the option of "Enable Encryption Partition" to protect
cryptographic keys and satisfy privacy concerns for end users in the field. The
encryption will allow the configuration and data files to be stored in encrypted for-
mat. It is recommended to always select "Enable Encryption Partition" option
before leaving panel in normal operation.
Network Ports
Physical Ports, Protocols, and Services
The following inbound ports are used to accept the connections:
PW7K Panel Inbound Ports.
Port
67
68
80
443
161
3001
5353
Equipment Replacement/Decommissioning
When replacement/decommissioning a board, make sure to use factory default
option to clear all data in the controller before discard panel. Please refer to the
PW7K Installation Guide for detailed step by step instructions to put the panel in
the factory default condition.
PW7K Security Manual
Protocol Standard/Custom
UDP DHCPS
UDP DHCPC
TCP HTTP
TCP HTTPs
UDP SNMP
TCP Mercury Host
Protocol(MSP2)
UDP Zeroconf (Discovery
service)
@Honeywell Inc
Disable
Used for DHCP
Used for DHCP
Yes – Use Disable Web Server from the
Users web confirmation page
Yes - Use Disable Web Server from the
Users web configuration page.
Yes – Use Disable SNMP from the
Users web configuration page.
Yes – Set the Connection Type from the
Host Comm page to an option other than
IP.
Note: For the best security it is
recommended to change default host
communication port.
Yes – Use the Disable Bonjour option
from the Users web configuration page.
9