Environmental Protection; Symbols On The Product; Symbols In This Manual - Ryobi RMT200 Original Instructions Manual

cloths to remove dirt, carbon dust, etc.
Electrical tools used on fiberglass material, wallboard,
spackling compounds, or plaster are subject to
accelerated wear and possible premature failure
because the fiberglass chips and grindings are highly
abrasive to bearings, brushes, commutators, etc. We
do not recommend using the product for extended work
on these types of materials.
If the supply cord is damaged, it must be replaced
by a special cord or assembly available from the
manufacturer or its service agent.
For greater safety and reliability, all repairs should be
performed by an authorised service centre.
WARNING
Always wear safety goggles or safety glasses with side
shields during power tool operation or when blowing
dust. If operation is dusty, also wear a dust mask.
LUBRICATION
All of the bearings in the product are lubricated with a
the product under normal operating conditions. Therefore,
no further lubrication is required.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environment-
friendly recycling.

SYMBOLS ON THE PRODUCT

Safety Alert
V Volts
Hz Hertz
Alternating current
W Watts
n No-load speed
o
Revolutions or reciprocations per minute
Class II tool
Double insulation
CE Conformity
EurAsian Conformity Mark
4
Ukrainian mark of conformity
Wood
Non-ferrous metals
Plastic
Drywall
Concrete
Glue
Tile
Please read the instructions carefully before
starting the product.
Wear ear protection
Wear eye protection
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authority or retailer for recycling advice.

SYMBOLS IN THIS MANUAL

Connect to the power supply.
Parts or accessories sold separately
Lock
Unlock
Speed, minimum
Speed, maximum
Safety