Environmental Protection; Maintenance - Ryobi R18RW Original Instructions Manual

18v ratchet wrench

Hide thumbs

Table Of Contents

Table of Contents

in certain individuals. Symptoms may include tingling,

numbness and blanching of the fingers, usually apparent

upon exposure to cold. Hereditary factors, exposure to

cold and dampness, diet, smoking and work practices

are all thought to contribute to the development of these

symptoms. There are measures that can be taken by the

operator to possibly reduce the effects of vibration:

■

Keep your body warm in cold weather. When operating

the unit wear gloves to keep the hands and wrists

warm. It is reported that cold weather is a major factor

contributing to Raynaud's Syndrome.

■

After each period of operation, exercise to increase

blood circulation.

■

Take frequent work breaks. Limit the amount of

exposure per day.

If you experience any of the symptoms of this condition,

immediately discontinue use and see your doctor about

these symptoms.

WARNING

Injuries may be caused, or aggravated, by prolonged

use of a tool. When using any tool for prolonged periods,

ensure you take regular breaks.

MAINTENANCE

WARNING

The product should never be connected to a power

supply when you are assembling parts, cleaning,

performing maintenance, or when the product is not in

use. Disconnecting the product will prevent accidental

starting that could cause serious injury.

WARNING

When servicing, use only identical Ryobi replacement

parts. Use of any other parts may create a hazard or

cause product damage.

■

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to various types of commercial

solvents and may be damaged by their use. Use clean

cloths to remove dirt, carbon dust, etc.

WARNING

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc. come in contact

with plastic parts. They contain chemicals that can

damage, weaken or destroy plastic.

■

Electric tools used on fiberglass material, wallboard,

spackling compounds, or plaster are subject to

accelerated wear and possible premature failure

because the fiberglass chips and grindings are highly

abrasive to bearings, brushes and commutators. The

manufacturer does not recommend the use of the

product for extended periods of time on these types of

materials.

WARNING

Do not use compressed air to blow dust from the product

to prevent serious eye injury.

■

For greater safety and reliability, all repairs should be

performed by an authorised Ryobi service centre.

■

All of the bearings in this tool are lubricated with a

sufficient amount of high grade lubricant for the life of

the unit under normal operating conditions. Therefore,

no further lubrication is required.