Table of Contents
Advertisement
MAINTENANCE
54
Dryer
WARNING
• Remove the power plug when you clean the
appliance. Not removing the plug may result in
electric shock.
Cleaning the Lint Filter
CAUTION
• Clean the lint filter in the proper way referring to
the following instructions. Failure to do so, the
lint that is accumulated on the heat exchanger
may not be cleaned properly.
NOTE
• Unload the all of the laundries from the
appliance before pull out the lint filter.
• After cleaning the lint filter insert them in a
place. If the lint filter is not in the appliance, you
can not operate the appliance.
a
Inner Filter
• Always clean the inner filter before and after
use.
Outer Filter
b
• Clean the outer filter after drying 10 times or
when the lint has accumulated into the outer
filter.
• A chime will sound and the
blink when the lint has accumulated.
Clean the inner filter
1
Pull out the inner filter from the outer filter and
then open the inner filter.
K
indicator will
• Open the filter by unfolding it in the
direction of the arrow.
2
Clean a large cluster of lint first, then clean the
residual lint using vacuum cleaner or washing
under running water.
• Dry the filter completely if the filter is moist.
Failure to do so, odour may occur in the
appliance.
3
After drying the inner filter completely, close
the filter by pushing down its center.
• Ensure the left and right side of the inner
filter is closed properly.
4
Insert the inner filter into the outer filter.
Clean the outer filter
1
Remove the dust or lint around the filter inlet.
CAUTION
• When the lint drops into the filter inlet, it may
cause degradation of drying performance and
increase in drying time.
2
Pull out the outer filter.
Hide quick links:
Advertisement
Table of Contents
