LG WWT-1710B Owner's Manual page 34

OPERATION-WASHER
34
2
Select a washing programme.
3
Change the washing programme (Temp.,
Rinse or Spin) as necessary.
4
Press the Steam or Turbo Clean button.
5
Press the Start/Pause button.
Prepare to Dry
Setting this function allows the the dryer to operate
automatically after the washing programme.
Follow the next steps to use a special
option.
1
Press the Power button of the washer.
2
Select a washing programme.
3
Change the washing programme (Temp.,
Rinse or Spin) if necessary.
4
Press the Turbo Clean button of the washer for
3 seconds.
5
Press the Start/Pause button of the washer.
• When the dryer is turned, the paired drying
programme and option will be displayed.
• After the load weight is sensed, the dryer
display shows the estimated remaining dry
time for about 1 minute.
While the Prepare to Dry is in operation, the
dryer display shows
6
After the washing programme is finished, load
items into the dryer and close the door.
7
Press the Start/Pause button of the dryer.
• The dryer display shows the estimated
remaining dry time.
.
PrE
NOTE
• the Prepare to Dry function will not be activated
in the following cases:
- If you don't start the dryer within 15 minutes
after the washing programme has finished
- If the dryer is unplugged
- If the remote control function is used
- If the washer or dryer is shut down while
setting the Prepare to Dry function
• When the option is set, only the Power button
works and lock the door. Open the door of the
dryer after the washing programme has
finished.
Using Basic Options
You can customize the programmes by using the
following basic options:
Rinse+Spin
It allows you to rinse and spin a load separately
from a regular programme. It is helpful in
preventing fresh stains from setting in fabrics.
1
Press the Power button.
2
Select a washing programme.
3
Press and hold the Temp. button for 3 seconds
as necessary.
• You can change the spin speed by pressing
the Spin button.
4
Press the Start/Pause button.
Add Item
You can use this option in order to add or remove
clothes after the washing programme has started.
1
Press the Power button.
2
Select a washing programme.
3
Press the Start/Pause button.