It is recommended that you ship the projector with its original packing or equivalent.
Outdoor use
Anytime the projector is used outdoors, remember to follow the care instructions in this chapter and the cleaning instructions described in
safety instructions on page
9.
Extending LED life
The LED headlight includes a bulb which features a light-source life far beyond traditional bulbs, yet it is still a consumable item. To keep the LED life as
long as possible, you can change the following settings via the settings menu.
To access the settings menu, see
Setting LED Mode
Set the projector Power Mode to Eco Mode or Low Power to extend the LED life.
LED mode
Normal
Eco Mode
Low Power
1. Press the PROJECTOR MENU button on the remote control.
2. Select Power Mode.
3. Press ( / ) to move to your desired mode.
4. When done, press to
your changes and exit.
Using the Settings menu on page 54
100% LED brightness.
This setting reduces system noise and power consumption by 30%. If Eco Mode is selected, the light output
will be reduced and result in darker projected pictures.