Installing/Replacing The Remote Control Batteries - BenQ Portable Series User Manual

Installing/Replacing the remote control batteries

Before you can begin to use the remote control, you must install the supplied batteries into the remote control.
1. Slide the battery cover outwards.
When sliding the battery cover, do not try to pull the cover too hard as it is tethered to the remote control by a plastic band and cannot be completely removed.
2. Insert the batteries in the orientation shown below.
3. Slide the battery cover back onto the remote control.
Avoid leaving the remote control and battery in an excessively hot or humid environment like the kitchen, bathroom, sauna, sunroom or in a closed car.
23