Basic Operations; Turning On And Off The Power; Adjusting The Volume; Opening The Operation Panel And Adjusting The Angle - Clarion VX709 Owner's Manual & Installation Manual

4. BASIC OPERATIONS

Note:
• Be sure to read this chapter referring to the chapter "3. CONTROLS" (page 8).

Turning On and Off the Power

CAUTION
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level may harm your hearings.
Be careful about adjusting the volume.
Note:
• Start the engine before using this unit.
• Be careful about using this unit for a long time
without running the engine. If you drain the car's
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.

Adjusting the Volume

1. Press the [–]/[+] buttons to adjust the volume.
[–]: Decreases the volume.
[+]: Increases the volume.
• The volume level indicated in the display is
in a range from 0 (min.) to 33 (max.).

Opening the operation panel and adjusting the angle

Open the operation panel when inserting/ejecting
a disc.
The angle of the operation panel can be adjusted
depending on the mounting angle of the unit or
light coming into the car.
CAUTION
CAUTION
• Do not move the operation panel forcibly or
do not apply strong force to the operation
panel.
• When the operation panel is operating, be
careful not to get your hand or finger caught
between the operation panel and main unit
or its mechanical parts.
• The driver should not operate the operation
panel while driving.
18
VX709
1. Start the engine. The power is supplied to this
unit.
2. Press the [SRC] button. The unit
automatically memorizes its last operation
mode and will automatically switch to display
that mode.
3. To turn off the power, press and hold the
[SRC] button for more than 1 second.
CAUTION
CAUTION
While driving, keep the volume level at which
external sounds can be heard.
Opening/closing the operation panel
1. Press the [7] (OPEN/CLOSE) button.
The operation panel will be opened or closed.
Note:
• The operation panel will close automatically when
leaving it open for a while.
• When the operation panel is open, the touch panel
cannot be operated.
Engine ON
position