8) Double click the newly added "SPDB-08UP-001" module, select the
"Parameters" tab to assign the module parameters in the new pop-up window.
Users can select "input" and "output" of each signal port to define that it is used
as an input or output, while the default "output universal" indicates that the
signal port can be used as input or output, which depends on the customer
wiring.
Note: SPDB-08UP-xxx in which the input and output ports can be defined as
required in the application. All the other modules are fix.
9) Double click the newly added "SPDB-0300A-001" module, select the
Parameters tab to assign parametersin the new pop-up window. The user can
select the current input type of each signal port: "0~20mA", "4~20mA",
"-20~+20mA", you can also close the port to improve the sample scanning speed
of this module.
Spider67 Profinet– Extensible industrial fieldbus I/O System
56 / 62