Celco Spider67 System Manual page 55

6) According to the instructions in Section 3.3, double-click the Spider67 gateway,
enter the device view of SPPN-GW-001, set the device name "elco67" of
Spider67 gateway in the window, and set the IP address.
7) Based on the I/O module configuration described in the beginning of this
section, we add the module type and quantity to each slot position of Spider67
gateway in the catalog window, from the directory "SPPN-GW-001" according to
the sequence of the extension port P0-P1-P2-P3 and assign the input and output
address.
Spider67 Profinet– Extensible industrial fieldbus I/O System
55 / 62